AMPJet_Board Set
Get up and get AMP'd
- Best for
- Assisted surf, wing, downwind
- Assist
- AMPJet, up to 25 kg thrust
- Included
- Everything above the water
- You add
- Your own mast and foil


FLITELab* AMPJet, foil boards and FLUX wings
FLITELab* is the performance foiling range from the makers of Fliteboard, created by foilers for foilers. Its AMPJet is a jet drive built into the board: two 142 Wh AMPCells give up to 25 kg of thrust to boost you onto a wave, then you ride on unassisted. Around it sit the AMP and RAW carbon boards, the FLUX wings designed with Adam Bennetts and the UHM_Mast, for surf foiling, winging and downwinding.
For yachts, AMPJet is a compact way to catch waves without a jet ski tow. We advise and supply FLITELab* in Mallorca, Ibiza and Sint Maarten.
Assisted or unassisted: choose the complete AMPJet set, add the jet system to an AMP_Board, or ride the RAW_Board without power.
Get up and get AMP'd
Add assist to your AMP_Board
Assist-ready carbon board
Pure, unassisted prone
25 kg maximum thrust with two AMPCell_142 batteries; a single AMPCell gives less thrust.
Shop by category
AMPJet is a jet drive built into the centre of the board. The fully enclosed impeller adds little drag, keeps swing weight low and reduces the risk of prop strike. Boost onto a wave or up on foil, then ride on unassisted, or swap the jet for the blank cartridge in seconds.
AMPCells are interlocking 142 Wh batteries weighing 1.0 kg each. Two of them give AMPJet its 25 kg of maximum thrust, and each charges in about one hour.
The FLUX wings are agile mid aspect-ratio wings for prone and wing foilers, with a surf-oriented ride, strong low end and pump. A conical interface gives a rock-solid connection to the mast. The UHM_Mast is a hyper-stiff ultra-high-modulus carbon mast in 82 and 87 cm.
Why eFoil Riders
FLITELab* is the performance foiling range from the makers of Fliteboard. It covers the AMPJet board-based jet assist with AMPCell batteries, the AMP and RAW carbon foil boards, the FLUX wings designed with Adam Bennetts and the UHM_Mast, for assisted and unassisted surf foiling, winging and downwinding.
AMPJet is a jet drive that sits centrally inside an AMP_Board, with a fully enclosed impeller for low drag and no exposed propeller. With two AMPCells it gives up to 25 kg of thrust to boost you onto a wave or up on foil; then you ride on without power. It swaps out in seconds for a blank cartridge when you want to ride fully unassisted.
The AMP Jet_System Set contains the AMPJet_Cartridge, two AMPCell_142 batteries, the AMPCell Charger and the AMP_LAUNCHPad; the board is not included. The AMPJet_Board Set includes everything above the water, so you only add your own mast and foil. AMP_Boards come with deck pad, AMP_Cartridge_Blank and board bag.
The AMP_S_Board comes in three sizes: 4'2" × 17.5" (27 l), a small board for prone foiling and bigger downwind days with AMPJet; 4'6" × 18.5" (34 l), the all-rounder for prone, downwind and winging in under 8 knots with AMPJet; and 4'8" × 20" (40 l), with more volume and a wider tail for beginners. All are compatible with AMPJet.
Yes. The AMPJet_Board Set includes everything above the water, and you connect your own mast and foil. FLITELab* also offers the UHM_Mast in 82 and 87 cm and the FLUX wing sets.
Each AMPCell stores 142 Wh and weighs 1.0 kg. That is below the 160 Wh limit most airlines accept for spare lithium batteries with their approval, which is why FLITELab* calls them fly-safe. Always check with your airline before you travel.
About one hour per AMPCell with the AMPCell Charger, one battery at a time. The charger is sold separately.
Each AMPCell has an advanced battery monitoring system, phase change material for extra thermal headroom, a humidity sensor that detects a failure of the seals and a sight glass to check for moisture visually.
The FLUX wings are mid aspect-ratio wings for prone and wing foilers, with a conical connection to the mast. The FLUX_808_AB set is the go-to Adam Bennetts signature set for intermediate to advanced riders in knee to head-high waves and works for winging in a wide range of conditions. Nick helps you choose the size for your weight and waves.
Talk to our FLITELab* specialist

My name is Nick. As a professional surfer working closely with FLITELab, I help you find the ideal setup. Contact me and I will support you personally.